MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-180
DID Trunks
3
Console/Display Instructions
Additional Information
PC
7.
Enter the number of digits to add (
n
=
1
to
9999
).
Dial or type
[n].
Ã
8.
Continue to specify added digits for the other trunk block or go to Step 9.
Select
Next.
Return to Step 6. The next block is
displayed on Line 1.
9.
Save your entry.
Select
Enter.
10. Return to the System Programming menu.
Select
Exit
twice.
Signaling
3
Use this procedure to specify whether the type of dialing signal from the local
telephone company is touch-tone or rotary. Touch-tone dial mode cannot be
programmed for immediate-start DID trunks.
Touch-tone single-line telephone users cannot make calls by using individual
trunks programmed for rotary operation. The touch-tone signals generated from
the telephone while dialing are transmitted to the central office at the same time
the rotary signals are sent to the system. The central office receives both signals
and cannot process the call.
Summary: Signaling
3
Programmable by
System Manager
Mode
Hybrid/PBX
Idle Condition
Not Required
Planning Form
3d, Incoming Trunks: DID
Factory Setting
Rotary
Valid Entries
Rotary, Touch-tone
Inspect
No
Copy Option
No
Console Procedure
LinesTrunks
→
DID
→
Signaling
→
Dial trunk
block no.
→
Enter
→
Rotary
or
TouchTone
→
Enter
→
Exit
→
Exit
