MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-396
QCC Optional Features
3
Console Display/Instructions
Additional Information
PC
4.
Specify the QCC operator extension.
5.
Assign or remove the extension as a message center.
Select
Enter
or
Delete.
You may continue to assign or remove
extensions as a message center by
repeating Steps 4 and 5.
6.
Return to the System Programming menu.
Select
Exit
three times.
Extended (Directed) Call Completion
3
Use this procedure to specify one of the two basic options shown below for QCC
operator positions with a DSS only:
■
Automatic Completion. Allows one-touch call transfer—that is, calls are
transferred by touching only an extension button on the DSS. The operator
does not have to press the Release button.
■
Manual Completion. QCC operators must press the Release button to
direct a call using a DSS.
This option cannot be programmed for individual QCC operator positions. The
setting applies to all QCC operator positions.
Operator Message Center:
If no DSS is attached:
Enter QCC operator
SP: “Entering an Extension”
Ã
extension number
If DSS is attached:
Toggle the red LED on or off as required.
Backspace
Delete
Exit
Enter
On = extension is message center position
Off = extension is not an operator position
Flashing = extension is not message
center position