MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-12
Basic System Operating Conditions
3
Console Display/Instructions
Additional Information
PC
2.
Select
Mode.
3.
Select the mode.
4.
Save your entry.
Select
Enter.
The session is terminated and the
system restarts. You must enter system
programming again to continue.
Automatic Maintenance Busy
3
Automatic Maintenance Busy allows the system to take a malfunctioning trunk out
of service for outgoing calls (incoming calls are never blocked). This prevents
faulty outside facilities from causing disruptions in outgoing calling patterns.
For optimal performance, enable Automatic Maintenance Busy for Hybrid/PBX
systems with pooled trunks.
NOTE:
No more than half of the trunks in a trunk pool are allowed to be placed in
the Maintenance Busy state at one time, unless the central office has failed
to disconnect a trunk (which prevents anyone from using that trunk) or an
entire trunk module is manually taken out of use (a Maintenance-Busy state
deliberately caused by the user).
System:
Make a selection
Restart
MaintenBusy
SProg Port
Date
Mode
Time
Board Renum
Back/Restore
Exit
Mode:
Select one
Key
Hybrid/PBX
BehndSwtch
Select
Key
,
Hybrid/PBX
,
Exit
Enter
or
BehndSwtch.
