Lighthouse RLPC 0.1m, Operating Manual, Page: 46 / 118

Lighthouse REMOTE Liquid Particle Counter (MODBUS Output) Operating Manual
5-6 248083227-1 Rev 8
<ta#> Set Sample Seconds
Configures the sample time interval where # is the
number of seconds in the sample. The minimum value is
30 seconds and maximum value is 23 hours, 59 minutes,
59 seconds, or 83699 seconds.
<tb#> Set Holdtime Seconds
Configures the time in between samples when the unit is
not counting; # is the hold time in seconds.
<pa#> Set Location Num (0-999)
Configures the location of the instrument.
<aa#> Set Alarm Channel #
Configures the instrument to use any channel to trigger
the alarm condition. Multiple channels may be used for
alarming.
<a1#>
<a2#>
<a3#>
<a4#> Set Alarm # Threshold (# of counts)
Configures the value at which the alarm channel must
exceed in order to trigger the alarm condition. Each
channel may be configured to a different threshold.
<ae#> Set Alarm Suppression #
The number of alarm conditions have to be greater than #
in order to turn on the Alarm Relay. Used for Local
Alarming.
<da#> Set Year = YY
Configures the 2-digit year; ex: <da04> for 2004
<db#> Set Month = MM
Configures the 2-digit month; ex: <db01> for 01
<dc#> Set Day = DD
Configures the 2-digit day; ex: <dc28> for 28
<dd#> Set Hour = HH
Configures the 2-digit hour; ex: <dd13> for 13 :00:00
<de#> Set Minute = MMin
Configures the 2-digit minute; ex: <de25> for 13: 25 :00
<df#> Set Second = SS
Configures the 2-digit second; ex: <df43> for 13:25: 43
Table 5-1 User Menu Commands <m1>
ASCII
Command
Description