Lighthouse RLPC 0.1m, Operating Manual, Page: 45 / 118

Configuring with LWS ASCII Service Protocol
248083227-1 Rev 8 5-5
8. If no commands are input for 60 seconds, the first sample record
will display as the instrument begins to sample automatically:
Sample: 0, 0; bk= 371; trh= 74.7/ 43.0; rec=95;
Sample: 0, 0; bk= 371; trh= 74.7/ 43.0; rec=96;
Summary of Configuration Commands
The basic user configuration commands are displayed in Table 5-1.
Table 5-1 User Menu Commands <m1>
ASCII
Command
Description
<?> Display Parameters
Displays current configuration parameters.
<V> Verbose Mode
Sets instrument to echo responses.
<sa> Start Counting
Instrument starts counting right away using configured
sample time; will show first sample after sample time
passes.
<sb> Stop Counting
Instrument stops counting; can send more programming
commands after sending <V> command.
<gd> Get Date/Time
Displays the currently configured date and time on the
Real Time Clock.
<gm> Get Model Name
Displays the configured model name and number of the
instrument.
<gs> Get Serial Number
Displays the configured serial number of the instrument.
<gv> Get Version Number
Displays the current version of the firmware.
<gw> Get View Volume
Displays the percent of the sample volume measured by
the RLPC (ie. if sample volume is 100ml and view
volume is 80%, the volume from which measurements
are taken is 80ml).