manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 854

EXPLANATION OF MAINTENANCE ITEMS

MAINTENANCE

Scheduled Maintenance Log

71

Spark Plugs

Replace at specified interval. Install
new plugs of the same type as origi-
nally equipped. A qualified technician
should perform this operation. 

Steering Linkage and Boots

With the vehicle stopped, check for
excessive freeplay in the steering
wheel. Inspect the linkage for bending
and damage and the dust boots for
deterioration, cracks and damage.
Replace any damaged parts. A quali-
fied technician should perform these
operations.

Timing Chain 

The timing chain requires no periodic
inspection.

Tire Rotation

See your 

Owner’s Manual

for tire

rotation requirements. Check tire
pressure and check tires for damage
and uneven wear. If the vehicle is
equipped with a spare tire, check the
condition and pressure of the spare.

Tire-Pressure Warning Sensors

A tire-pressure sensor is mounted on
each full-size wheel. These sensors 
do not require periodic maintenance.
When a sensor’s long-life lithium bat-
tery becomes discharged, the battery
should be replaced by a qualified
technician following procedures in
Lexus service and repair publications.

Transmission/Transfer Case

Inspect transmission/transfer case for
signs of leakage. If you discover any
leakage, have it repaired immediately
by a qualified technician.

Note: 

The transmission/transfer case

and transmission fluid are a complete-
ly sealed unit. Therefore, periodic
checks and replacement of the trans-
mission fluid are not required, and
there is no dipstick on the transmis-
sion. Any repairs that require adding
or replacing fluid should be per-
formed by a qualified technician fol-
lowing procedures in Lexus service
and repair publications.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands