manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 205

GS350_U (OM30C34U)

229

4-5. Using the driving support systems

4

Dr
iving

Lane departure warning function

If the system judges that the vehicle may deviate from its lane, it alerts
the driver using beeping, screen displays and a sensory warning

*

 given

via the steering wheel.

*

: A slight steering torque is applied for a short period of time in the direction of

the center of the lane.

Lane keeping assist function

• This function will be active when the vehicle-to-vehicle distance con-

trol mode of the cruise control (

→

P. 213) is set with vehicle speed

above approximately 45 mph (72 km/h) and while the lane depar-
ture warning function is active.

• When the lane keeping assist function is active, a slight steering

torque will be applied, to help the driver maintain the vehicle inside
the lane.

The lane keeping assist function will be temporarily canceled if the steering
wheel is not operated, or if you continue driving with your hands lightly touch-
ing the steering wheel. (

→

P. 233)

Functions included in the LKA

1

2

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands