manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 316

GS350_U (OM30C34U)

5-1. Remote Touch screen

■

Voice command system

●

Commands that are not displayed in the “Shortcut Menu” screen can be operated
from the “Main Menu” screen.

●

If the system does not respond or the confirmation screen does not disappear,

press 

 and try again.

●

Voice guidance can be canceled by setting voice prompts to off. Use this setting

when it is desirable to say a command immediately after pressing 

 and hearing

a beep.

■

If a voice command cannot be recognized

●

If a voice command cannot be recognized within 6 seconds, voice guidance will
say “Pardon?” (“Command not recognized.” will be displayed on the screen) and
voice command reception will restart.

●

If a voice command cannot be recognized 2 consecutive times, the voice com-
mand guidance system will say “Paused. To restart voice recognition, push the talk
switch. To cancel voice recognition, push and hold the talk switch.” Voice recogni-

tion will then be suspended. Select “Cancel” or “Go Back”, or press 

.

■

When selecting “Voice Prompts”

●

The voice recognition prompt can be set to on or off. This setting can also be
changed on the “Voice Settings” screen. (

→

P. 330)

●

Voice recognition will be temporarily suspended. Press 

 again.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands