manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 323

GS350_U (OM30C34U)

5-2. Using the air conditioning system and defogger

5

Inte
rior fe

ature

s

Press 

 to operate the speech

command system. (

→

P. 334/”Nav-

igation System Owner’s Manual”)

Press .

The dehumidification function begins to operate. Air outlets and fan speed are
automatically adjusted according to the temperature setting and humidity.

Press 

 to switch to automatic air intake mode.

The air conditioning system automatically switches between outside air and recir-
culated air modes.

Press “

∧

” on 

 to increase the temperature and “

∨

” to decrease the

temperature.

w

Without rear air conditioning system

When 

 is selected (the indicator on 

 is on) or the passenger’s side

temperature control button is pressed, the temperature for the driver and passen-
ger seats can be adjusted separately.

w

With rear air conditioning system

When 

 is selected (the indicator on 

 is on) or the passenger’s side

temperature control button is pressed, the temperature for the driver’s, front pas-
senger’s and rear seats (

→

P. 360) can be adjusted separately.

Air outlets and fan speed for the driver and passenger seats may be adjusted sep-
arately depending on the temperature setting.

Using the speech command system

Using the automatic air conditioning system

1

2

3

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands