manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 163

GS350_U (OM30C34U)

4-2. Driving procedures

4

Dr
iving

The parking brake is set or released automatically according to shift lever
operation.

Turns automatic mode on/off

●

When the shift lever is moved out
of P, the parking brake will be
released.

●

When the shift lever is moved into
P, the parking brake will be set.

Operate the shift lever with the brake
pedal depressed.

■

Parking brake operation

●

When the engine switch is not in IGNITION ON mode, the parking brake cannot
be released using the parking brake switch.

●

When the engine switch is not in IGNITION ON mode, automatic mode (auto-
matic brake setting and releasing) is not available.

●

If the parking brake is operated repeatedly over a short period of time, the system
may restrict operation to prevent overheating. If this happens, refrain from operat-
ing the parking brake. Normal operation will return after about 1 minute.

■

Parking brake operation sound

When the parking brake operates, a motor sound (whirring sound) may be heard.
This does not indicate a malfunction.

■

Parking brake indicator light

●

Depending on the engine switch mode, the parking brake indicator light will come
on and stay on as described below:

IGNITION ON mode: Comes on until the parking brake is released. 
Not in IGNITION ON mode: Stays on for approximately 15 seconds.

●

When the engine switch is turned off with the parking brake set, the parking brake
indicator light will stay on for about 15 seconds. This does not indicate a malfunc-
tion.

Automatic mode

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands