manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 369

GS350_U (OM30C34U)

5-3. Using the audio system

5

Inte
rior fe

ature

s

Select “HD Radio/Analog Set-
ting”.

Select the item to be set.

“All”: Select to receive both analog
and digital broadcasts.

“HD Only”: Select to receive only dig-
ital broadcasts.

“Analog”: Select to receive only ana-
log broadcasts.

Select “Save”.

HD Radio™ Technology is the digital evolution of analog AM/FM radio.
Your radio product has a special receiver which allows it to receive digital
broadcasts (where available) in addition to the analog broadcasts it
already receives.

Digital broadcasts have better sound quality than analog broadcasts as
digital broadcasts provide free, crystal clear audio with no static or distor-
tion. For more information, and a guide to available radio stations and pro-
gramming, refer to www.hdradio.com.

4

5

HD Radio™ Technology

6

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands