manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 558

GS350_U (OM30C34U)

5-7. Other interior features

■

Before programming

●

Install a new battery in the remote control transmitter.

●

The battery side of the remote control transmitter must be pointed away from the
HomeLink

®

 button.

■

Certification for the garage door opener

w

For vehicles sold in the U.S.A.

FCC ID: NZLOBIHL4

NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

FCC WARNING:
Changes or modifications not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.

w

For vehicles sold in Canada

NOTE:
Operation is subject to the following two conditions: 
(1) this device may not cause interference, and 
(2) this device must accept any interference, including interference that may cause
undesired operation.

■

When support is necessary

Visit on the web at www.homelink.com or call 1-800-355-3515.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands