manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 721

GS350_U (OM30C34U)

7

When trouble 

ari
ses

7-2. Steps to take in an emergency

If your vehicle overheats

Stop the vehicle in a safe place and turn off the air conditioning system.

Check to see if steam is coming out from under the hood.

If you see steam: 
Stop the engine. Carefully lift the hood after the steam subsides and
then restart the engine.

If you do not see steam:
Leave the engine running and carefully lift the hood.

Check to see if the cooling fan is operating.

If the fan is operating: 
Wait until the temperature of the engine (shown on the instrument
panel) begins to fall and then stop the engine.

If the fan is not operating: 
Stop the engine immediately and call your Lexus dealer.

After the engine has cooled
down sufficiently, check the
engine coolant level and inspect
the radiator core (radiator) for
any leaks.

If the engine compartment cover
needs to be removed: 

→

P. 616

Add engine coolant if necessary.

Water can be used in an emergency if
engine coolant is unavailable. 
(

→

P. 756)

Have the vehicle inspected at the nearest Lexus dealer as soon as possi-
ble.

1

2

3

4

5

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands