manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 106

GS350_U (OM30C34U)

129

3-3. Adjusting the seats

3

Op
era
tio

n of
 e

ach

 co
m

po
ne

nt

■

Power easy access system

The driver’s seat and steering wheel move in accordance with engine switch mode
and the driver’s seat belt condition. The passenger’s seat moves when the passen-
ger’s door is opened. (

→

P. 133)

CAUTION

■

When adjusting the seat position

●

Take care when adjusting the seat position to ensure that other passengers are
not injured by the moving seat.

●

Do not put your hands under the seat or near the moving parts to avoid injury.
Fingers or hands may become jammed in the seat mechanism.

■

Seat adjustment

To reduce the risk of sliding under the lap belt during a collision, do not recline the
seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply restraint
forces directly to the abdomen, or your neck may contact the shoulder belt,
increasing the risk of death or serious injury in the event of an accident.
Adjustments should not be made while driving as the seat may unexpectedly move
and cause the driver to lose control of the vehicle.

■

When adjusting the seat positions

Make sure to leave enough space around the feet so they do not get stuck.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands