manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 706

7-2. Steps to take in an emergency

GS350_U (OM30C34U)

■

The compact spare tire

●

The compact spare tire is identified by the label “TEMPORARY USE ONLY” on
the tire sidewall.
Use the compact spare tire temporarily, and only in an emergency.

●

Make sure to check the tire inflation pressure of the compact spare tire. 
(

→

P. 759)

■

When using the compact spare tire

As the compact spare tire is not equipped with a tire pressure warning valve and
transmitter, low inflation pressure of the spare tire will not be indicated by the tire
pressure warning system. Also, if you replace the compact spare tire after the tire
pressure warning light comes on, the light remains on.

■

When the compact spare tire is equipped

The vehicle becomes lower when driving with the compact spare tire compared to
when driving with standard tires.

■

If you have a flat rear tire on a road covered with snow or ice (vehicles with front
and rear tires of the same size)

Install the compact spare tire on one of the front wheels of the vehicle. Perform the
following steps and fit tire chains to the rear tires:

Replace a front tire with the compact spare tire.

Replace the flat rear tire with the tire removed from the front of the vehicle.

Fit tire chains to the rear tires.

1

2

3

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands