manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 615

GS350_U (OM30C34U)

6-3. Do-it-yourself maintenance

Wheels

When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width and
inset

*

.

Replacement wheels are available at your Lexus dealer.

*

: Conventionally referred to as “offset”.

Lexus does not recommend using the following:

●

Wheels of different sizes or types

●

Used wheels

●

Bent wheels that have been straightened

●

Steel wheels (2WD F SPORT models only)

●

Use only Lexus wheel nuts and wrenches designed for use with your
aluminum wheels.

●

When rotating, repairing or changing your tires, check that the wheel
nuts are still tight after driving 1000 miles (1600 km).

●

Be careful not to damage the aluminum wheels when using tire chains.

●

Use only Lexus genuine balance weights or equivalent and a plastic or
rubber hammer when balancing your wheels.

If a wheel is bent, cracked or heavily corroded, it should be replaced.
Otherwise, the tire may separate from the wheel or cause a loss of han-
dling control.

Wheel selection

Aluminum wheel precautions

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands