manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 274

298

GS350_U (OM30C34U)

4-6. Driving tips

Winter driving tips

●

Use fluids that are appropriate to the prevailing outside temperatures. 

• Engine oil
• Engine coolant
• Washer fluid

●

Have a service technician inspect the condition of the battery.

●

Have the vehicle fitted with four snow tires or purchase a set of tire
chains for the rear tires.

*

Ensure that all tires are the specified size and brand, and that chains match the
size of the tires.

*

: Tire chains cannot be mounted on the vehicles with front and rear tires of dif-

fering sizes and vehicles with LDH and 19-inch tires.

Carry out the necessary preparations and inspections before driving
the vehicle in winter. Always drive the vehicle in a manner appropriate
to the prevailing weather conditions. 

Preparation for winter

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands