manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 110

GS350_U (OM30C34U)

3-3. Adjusting the seats

3

Op
era
tio

n of
 e

ach

 co
m

po
ne

nt

■

Cancelation procedure

Carry only the key for which you want to cancel the linked door unlock
operation.
If 2 or more keys are in the vehicle, the driving position cannot be can-
celed properly.

Turn the engine switch to IGNITION ON mode.

While pressing the “SET” button, press the driver’s door lock switch
(either lock or unlock) until the signal beeps.

The auto away/return function
enables easy access by activating
when the driver or front passenger
attempts to enter or exit the vehicle.

■

Auto away function when exiting the vehicle (driver’s/front passen-
ger’s seat)

w

Driver’s seat

When all of the following actions have been performed, the steering
wheel will move up and back to the point farthest away from the driver
and the seat will move backward:

• The shift lever has been shifted to P.
• The engine switch has been turned off.
• The driver seat belt has been unfastened.

w

Front passenger’s seat (if equipped)

If the lumbar support, side support (if equipped), etc. of the front pas-
senger’s seat has been adjusted, the seat will return to its original state if
the front passenger’s door is opened while the vehicle is stopped to
allow easy exit from the vehicle.

Power easy access system

1

2

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands