manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 822

Introduction

THE IMPORTANCE OF SCHEDULED MAINTENANCE

MAINTENANCE

39

Regular maintenance is essential 
to obtaining the highest level of per-
formance, safety and reliability from
your Lexus. It can also enhance your
vehicle’s resale value. This section 
of the 

Warranty and Services Guide

is designed to help you make sure
your vehicle receives proper and
timely maintenance. It includes 
factory-recommended maintenance
guidelines as well as logs in which to
document your vehicle’s maintenance
history.

In addition to scheduled maintenance,
your Lexus requires ongoing general
maintenance such as fluid checks and
visual inspections. These procedures
are listed on pages 42–43 of this
booklet and described in detail in 

the “Maintenance” section of the

Owner’s Manual

.

It is especially important to check
your vehicle’s engine oil once a
month and to regularly replace the
engine oil and oil filter. Failure to do
so can cause oil starvation and/or oil
gelling, which can result in severe
damage to your vehicle and require
costly repairs that are not covered by
the New Vehicle Limited Warranty.

With proper maintenance and care,
your vehicle will last longer and deliv-
er more dependable, economical
performance. Follow this booklet’s
recommendations and you’ll enjoy
maximum reliability and peace of
mind from your Lexus for many years
to come.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands