manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 285

GS350_U (OM30C34U)

5-1. Remote Touch screen

5

Inte
rior fe

ature

s

■

To avoid damaging the Remote Touch screen

Remove any dirt on the screen by wiping with a soft cloth. Do not use detergent.

■

When using the Remote Touch screen

●

If the screen is cold, the display may be dark, or the system may seem to be operat-
ing slightly slower than normal.

●

When the screen is viewed through polarized sunglasses, a rainbow pattern may
appear on the screen due to optical characteristics of the screen. If this is disturb-
ing, please operate the screen without polarized sunglasses. 

●

Dimmed screen buttons cannot be operated.

■

Changing between day mode and night mode

The display condition is not changed to night mode even if the headlight switch is
turned on when the vehicle is in a bright area such as daytime.

■

To turn off the display

The display goes off when “Screen Off” is selected. To turn the “Display” screen back
on, select any button. The selected screen appears. 

To display the screen in day mode, even with
the headlight switch on, select “Day Mode”
for brightness and contrast control.

If the screen is set to day mode with the
headlight switch turned on, this condition is
memorized even with the engine turned off.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands