Lexus GS 350 2013 Owner'S Manual Download Page 325

Page: 325 / 862

GS350_U (OM30C34U)

5-2. Using the air conditioning system and defogger

Inte
rior fe

ature

With rear air conditioning system

To adjust the fan speed, select “

∧

” on

to increase the fan speed

and “

∨

” to decrease the fan speed on the operation screen.

Press

to turn the fan off.

To adjust the temperature setting, press “

∧

” on

to increase the

temperature and “

∨

” to decrease the temperature.

The air conditioning system switches between individual and simultaneous
modes each time

is selected.

When

is selected (the indicator on

is on) or the passenger’s

side temperature control button is pressed, the temperature for the driver’s,
front passenger’s and rear seats (

→

P. 360) can be adjusted separately.

To change the air outlets,
select an air outlet switch on
the operation screen.

Left-hand front seat

Right-hand front seat

Different air outlets for the
driver and front passenger seats
can be chosen.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS 350 2013

Reviews:

Brands by name

Popular brands

Lexus GS 350 2013, Owner'S Manual

Search results

Summary of Contents for GS 350 2013

Reviews:

Brands by name

Popular brands