manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 81

GS350_U (OM30C34U)

3-2. Opening, closing and locking the doors and trunk

■

Effective range (areas within which the electronic key is detected)

When locking or unlocking the
doors

The system can be operated when
the electronic key is within about
2.3 ft. (0.7 m) of an outside door
handle. (Only the doors detecting
the key can be operated.)

When opening the trunk

The system can be operated when
the electronic key is within about
2.3 ft. (0.7 m) of the trunk release
button.

When starting the engine or
changing engine switch modes

The system can be operated when
the electronic key is inside the vehi-
cle.

■

When the door cannot be locked by the lock sensor on the upper part of the door
handle

If the door will not lock even when the topside
sensor area is touched, try touching both the
topside and underside sensor areas at the
same time.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands