manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 107

GS350_U (OM30C34U)

3-3. Adjusting the seats

Driving position memory

Check that the shift lever is in P.

Turn the engine switch to IGNITION ON mode.

Adjust the driver’s seat, steering wheel, and outside rear view mirrors to
the desired positions. (When memorizing the front passenger’s seat,
adjust the front passenger’s seat to the desired positions.)

While pressing the “SET” button,
or within 3 seconds after the
“SET” button is pressed, press
button “1”, “2” or “3” until the sig-
nal beeps.

If the selected button has already
been preset, the previously recorded
position will be overwritten.

Your preferred driving position (the position of the driver’s seat, steer-
ing wheel and outside rear view mirrors) can be memorized and
recalled by pressing a button. It is also possible to set this function to
activate automatically when the doors are unlocked.
Three different driving positions can be entered into memory. 

The same buttons are found on the front passenger’s side, allowing the
position of the front passenger’s seat to be memorized (if equipped).

Entering a position to memory

1

2

3

4

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands