manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 406

GS350_U (OM30C34U)

5-3. Using the audio system

CD/DVD player and DVD video disc information

Refer to the following table and take the appropriate measures. If the
problem is not rectified, take the vehicle to your Lexus dealer.

The error messages may differ from those shown below depending on the
language selected.

Error messages

Message

Cause

Correction

Procedures

No disc found.

There is no disc in the
player.

Insert a disc.

Check DISC

• The disc is dirty or 

damaged.

• The disc is inserted 

upside down.

• The disc is not play-

able with the player.

• Clean the disc.
• Insert the disc cor-

rectly.

• Confirm the disc is 

playable with the 
player.

DISC Error

• There is a malfunction 

within the system.

• Operation is stopped 

due to a high temper-
ature inside the player.

• Eject the disc.
• Eject the disc and 

allow the player to 
cool down.

No music files found.

This indicates that no
playable data is included
in the disc.

Eject the disc.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands