manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 273

GS350_U (OM30C34U)

297

4-5. Using the driving support systems

4

Dr
iving

NOTICE

■

The near-infrared camera

●

Make sure the front windshield is kept clean.

●

System performance may deteriorate if rain water, condensation or ice adheres
to the camera. If you notice the inner lens of the camera is dirty, the garnish will
have to be replaced. Consult your Lexus dealer.

●

Do not subject the camera to strong impacts, or disassemble the camera.

●

As the alignment of the camera has been very finely adjusted, do not change or
remove the mounting.

●

If the front windshield fogs up, defog the windshield using the front defroster.

●

Do not dirty or scratch the camera lens.

●

Night view may not function properly if an object is placed on the sensor, or any-
thing that blocks the sensor is affixed to the windshield.

■

The near-infrared light

●

System performance may deteriorate if the areas around the headlights are dirty.
Clean the vehicle if it is dirty.

●

The near-infrared light irradiates strong energy not visible to the eyes. Do not
stare at the light at close range for a long time.

Follow these precautions to avoid damage to
or incorrect operation of the Lexus night
view.

Follow these precautions to avoid damage to
or incorrect operation of the Lexus night
view system

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands