manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 547

GS350_U (OM30C34U)

573

5-7. Other interior features

5

Inte
rior fe

ature

s

Pull the tab of the rear door sun-
shade and hook the shade on using
the anchors.

To retract the rear door sunshade,
unhook the shade and retract it slowly.

■

The rear sunshade can be used when

The engine switch is in IGNITION ON mode.

■

Operating the rear sunshade after the engine is turned off

The rear sunshade can be operated for approximately 1 minute even after the engine
switch is turned to ACCESSORY mode or turned off.

■

Reverse operation feature

To ensure adequate rear visibility, the rear sunshade automatically lowers when the
shift lever is shifted to R.

However, the rear sunshade is raised again if any of the following occurs:

●

The button is pressed again.

*

●

Shift the shift lever into P.

●

The shift lever is shifted out of R, and the vehicle reaches a speed of 9 mph
(15 km/h).
If the engine is off when the rear sunshade has been lowered due to the reverse
operation feature, it will not be raised even when the engine is turned on again
and the vehicle reaches a speed of 9 mph (15 km/h). To raise the sunshade again,
press the button.

*

: Occasionally, the reverse function may not be carried out after the switch has

been pressed. Repeat the above operation to operate the function.

Rear door sunshades

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands