manualshive.com logo in svg

Lexus GS 350 2013, Owner'S Manual

Share
Download
Lexus GS 350 2013 Owner'S Manual Download Page 261

GS350_U (OM30C34U)

4-5. Using the driving support systems

4

Dr
iving

CAUTION

■

Handling the driver monitor sensor

Observe the following to ensure the driver monitor sensor can function effectively.

Failure to do so may result in a malfunction or may prevent the system from cor-
rectly determining the direction the driver is facing, resulting in an unexpected
accident.

●

Do not disassemble, damage, lift or pull on the sensor.

●

Do not select the sensor while driving.

●

Do not wet or spill water on the sensor.

●

Do not drop anything on or allow anything to hit against the sensor. Do not sub-
ject the sensor to an impact.

●

Make sure that there are no scratches, dirt or stickers on the side of the sensor
that faces the driver.

●

Do not place any objects in front of the side of the sensor that faces the driver or
cover the sensor.

Summary of Contents for GS 350 2013































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands