232
Index
PIN for confidential jobs 218
pocket for
User’s Reference xi
Power Saver 7
priming the stapler 162
print and hold function
see
held jobs
print quality problems 20
print server
online documentation xiii
removing 199
printer
lifting 214
model with paper handling options
viii
operator panel ix
pocket for the
User’s Reference xi
standard model vii
supplies 107
printer menus
see
menu settings
printer messages 1
2
xx Paper Jam 12, 41
34 Wrong Paper Size in Tray
x 12
34 Wrong Paper Size Manual Feed
12
35 Res Save Off Deficient Memory
13
37 Insufficient Collation Area 13
37 Insufficient Defrag Memory 13
37 Insufficient Memory 14
38 Memory Full 14
39 Complex Page 15
51 Defective Flash 15
52 Flash Full 15
53 Unformatted Flash 15
54 Par
x ENA Connection Lost 16
54 Ser
x Fax Connection Lost 16
54 Serial Option
x Error 16
54 Std Par ENA Connection Lost 16
55 Insufficient Fax Buffer 16
56 Parallel Port x Disabled 17
56 Serial Port
x Disabled 17
56 Std Parallel Port Disabled 17
58 Too Many Disks Installed 17
61 Defective Disk 17
62 Disk Full 17
63 Unformatted Disk 17
70–79 messages 18
900–999 messages 18
Activating Menu Changes 1
Bin
x Full 1
Busy 1
Cancelling Job 2
Change Tray
x 2
Check Finisher Installation 2
Check Mailbox Installation 2
Clearing Job Accounting Stat 2
Close Cover
x 2
Close Door
x 2
Defragmenting 3
Deleting All Jobs 3
Deleting Jobs 3
Disabling Menus 3
Empty Box K 3, 163
Enabling Menus 3
Enter PIN 3, 218
Fax
x 3
Files will be Lost. Go/Stop? 3
Flushing Buffer 4
Formatting Disk 4
Formatting Flash 4
Held Jobs may be lost. Go/Stop? 14
Infrared
x 4
Insert PC Cartridge 4
Insert Stapler 4
Insert Tray
x 4
Invalid Network
x Code 4
Leave Staple Job in Finisher 12
Load Manual 5
Load Tray
x 6
LocalTalk
x 6
Menus Disabled x, 6
Network Card Busy 6
Network
x 6
No Jobs Found. Retry? 6, 219
Not Ready 6
Ovrflow Bin Full 6
Parallel 6
Parallel
x 6
Performing Self Test 7
Power Saver 7
Priming Failed 7, 162
Priming Stapler 7
Print Jobs on Disk? Go/Stop? 7
Printing Directory List 7
Printing Font List 7
Printing Job Accounting Stat 8
Printing Menu Settings 8
Summary of Contents for 12L0103
