Lexmark 12L0103, Reference

Page: 18 / 248

4
Messages
Flushing Buffer
The printer is flushing corrupted print data and
discarding the current print job.
Formatting Disk The printer is formatting the hard disk option.
Note: Do not turn the printer off while this message
is displayed.
Formatting Flash
DO NOT POWER OFF
The printer is formatting the flash memory option.
Note: Do not turn the printer off while this message
is displayed.
Infrared x An optional infrared interface is the active communi-
cation link.
Insert PC
Cartridge
The photoconductor cartridge is either not installed
or is installed incorrectly. Correctly install the photo-
conductor cartridge to clear the message.
For installation instructions, see page 116.
Insert Stapler The stapler either is not installed or is installed
incorrectly.
• Correctly install the stapler to clear the message.
For installation instructions, see step 12 on
page 153.
• Press
Go
to ignore the message.
If you choose to ignore the message, the printer
handles the job as if the stapler were installed but
out of staples. If the
Load Staples
message
appears, press Go again to ignore the message
and print the job without stapling it.
Insert Tray
x Insert the specified tray completely into the printer.
Note: If you cannot clear this message and the
specified tray is a 500-sheet paper tray (tray 2 or tray
3, or an optional tray 4), make sure the left paper
guide is properly inserted and snaps into the slot at
the front of the tray. For detailed instructions, see
step 5 on page 93.
Invalid
Network
x
Code
The code in an internal print server (also called an
internal network adapter or INA) is not valid. The
printer cannot receive any jobs until valid code is
programmed into the internal print server.
You can download network code while this message
is displayed.
Printer messages (continued)
Message Action