Lexmark 12L0103, Reference

Page: 182 / 248

168
Finisher
Resetting the printer’s internal counter
After you empty the hole punch box, reset the internal counter to clear the
Empty Box K
message. Resetting the counter helps prevent service calls
by ensuring that the printer alerts you when the hole punch box again
becomes full. The reset process only takes a few minutes.
W
ARNING
:
Before you begin this procedure, make sure the
printer is not busy processing a print job. Turning the
printer off deletes all held jobs stored in printer
memory. Open the Job Menu to review the held jobs
before continuing.
1
Turn the printer off.
2
Press and hold the
Select
and
Return
buttons on the operator
panel while you turn the printer on.
When
CONFIG MENU
appears on the first line of the display,
release the buttons.
MAINT COUNTERS
appears on the second
line.
3
Press
Select
.
4
Reset Hole Punch
appears on the second line.
5
Press
Select
.
Resetting Hole Punch Count
appears briefly on the display, and
then is replaced by
CONFIG MENU
on the first line and
MAINT COUNTERS
on the second line.
6
Press
<Menu
to display
Exit Config Menu
.
7
Press
Select
to return to the
Ready
display.
The printer displays
Activating Menu Changes
and resets the hole
punch counter. When
Ready
appears on the display, the printer is
ready to receive print jobs.