LevelOne ProCon GSW-1290, User Manual

Page: 122 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Select the desired Switch using the Unit drop-down menu and the desired port using the Port drop-down
menu. The Time Interval
field sets the interval at which the error statistics are updated.
The following field can be set:
Parameter Description
Unit
Allows you to specify a Switch in a Switch stack using that Switch’s Unit
ID. 15 indicates a Switch in standalone mode.
Port
Allows you to specify a port to monitor
−
from the Switch selected above.
Clear Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a
line graph.
View Line Chart Clicking this button instructs the Switch to display a line graph rather than
a table.
Bytes
Counts the number of bytes received on the port.
Packets Counts the number of packets received on the port.
Time Interval < 1s >
The time between updates received from the Switch, in seconds. The
default is
1s .
Record Number
<
200 >
Select number of times the Switch will be polled between 20 and 200 .
The default value is 200.
Show/Hide Check whether to display Bytes and Packets.
Received Unicast/Multicast/Broadcast Packets
Figure 7- 4. Rx Packets Analysis (line graph for Unicast, Multicast, & Broadcast) window
122