LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Figure 4- 51. Initialize Port window
This window allows you to initialize a port or group of ports. The Initialize Port Table in the bottom half of
the window displays the current status of the port(s) once you have clicked
Apply
.
This window displays the following information:
Parameter
Description
Unit
Allows you to specify a Switch in a switch stack using that Switch’s Unit ID.
The number 15 indicates a Switch in standalone mode.
From/To
A consecutive group of ports may be configured starting with the selected
port.
Port
The port number.
MAC Address
The MAC address of the switch where the port resides
Auth PAE State
The Authenticator PAE State will display one of the following:
Initialize
,
Disconnected
,
Connecting
,
Authenticating
,
Authenticated
,
Aborting
,
Held
,
ForceAuth
,
ForceUnauth
, and
N/A
.
Backend_State
The Backend Authentication State will display one of the following:
Request
,
Response
,
Success
,
Fail
,
Timeout
,
Idle
,
Initialize,
and
N/A.
Oper Dir
The Operational Controlled Directions are
both
and
in.
PortStatus
The status of the controlled port can be
authorized
,
unauthorized
, or
N/A
.
Reauthenticate Port(s)
This window allows you to reauthenticate a port or group of ports. The Reauthenticate Port Table displays
the current status of the port(s) once you have clicked
Apply
.
104
Summary of Contents for ProCon GSW-1290
