LevelOne ProCon GSW-1290, User Manual

Page: 113 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
SNMP Group Table Configuration
Figure 6- 8. SNMP Group Table Configuration window
The following parameters can be set:
Parameter Description
Group Name Type an alphanumeric string of up to 32 characters. This is used to
identify the new SNMP group of SNMP users.
Read View Name This name is used to specify the SNMP group created can request SNMP
messages.
Write View Name Specify a SNMP group name for users that are allowed SNMP write
privileges to the Switch’s SNMP agent.
Notify View Name Specify a SNMP group name for users that can receive SNMP trap
messages generated by the Switch’s SNMP agent.
Security Model SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPv2 – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management strategies.
It includes improvements in the Structure of Management Information
(SMI) and adds some security features.
USM – (User-based Security Module) Specifies that the SNMP version 3
will be used. SNMP v3 provides secure access to devices through a
combination of authentication and encrypting packets over the network.
Security Level
NoAuthNoPriv
−
Specifies that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
AuthNoPriv
−
Specifies that authorization will be required, but there will be
no encryption of packets sent between the Switch and a remote SNMP
manager.
AuthPriv
−
Specifies that authorization will be required, and that packets
113