LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
table for the selected Switch and group of ports.
Lock Address Mode
This pull-down menu allows you to select how the MAC address table
locking will be implemented on the Switch, for the selected group of ports.
The options are
Permanent
,
DeleteOnReset
, and
DeleteOnTimeout
.
SNTP Settings
The Simple Network Time Protocol (SNTP) (an adaptation of the Network Time Protocol (NPT)) is
configured on the Switch using the following windows.
Current Time and SNTP Settings
Figure 4- 37. Current Time and SNTP menu
The following parameters can set or are displayed:
Parameter
Description
Current Time
Displays the current system time.
Time Source
Displays the time source for the system.
SNTP State
Use this pull-down menu to enable or disable SNTP.
SNTP Secondary
Server
This is the primary server the SNTP information will be taken from
SNTP Poll Interval
i S
d
This is the interval between requests for updated SNTP information.
86
Summary of Contents for ProCon GSW-1290
