LevelOne ProCon GSW-1290, User Manual

Page: 108 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Chapter 6
SNMP Management
SNMPV3
SNMP User Table
SNMP View Table
SNMP Group Table
SNMP Community Table
SNMP Host Table
SNMP Engine ID
SNMPV3
The GSW-1290 incorporates a flexible SNMP management for the Switching environment. SNMP
management can be customized to suit the needs of the networks and the preferences of the network
administrator. Use the SNMP V3 windows to select the SNMP version used for specific tasks.
The GSW-1290 supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The
SNMP version used to monitor and control the Switch can be specified by the administrator. The three
versions of SNMP vary in the level of security provided between the management station and the network
device.
SNMP settings are configured using the windows located on the
SNMP V3 folder of the web manager.
Workstations on the network that are allowed SNMP privileged access to the Switch can be restricted with
the
Security IP Management window (located in the Security folder under Trusted Host ).
SNMP User Table
The SNMP User Table displays all of the SNMP User’s currently configured on the Switch.
Open the
Management folder and then the SNMPV3 folder. Finally click on the SNMP User Table link.
This will open the SNMP User Table , as shown below.
Figure 6- 1. SNMP User Table window
To delete an existing SNMP User Table entry, click on the X icon below the Delete heading corresponding
to the entry you want to delete.
108