LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
Multicast Forwarding
The following window describes how to set up Multicast forwarding on the Switch. Open the
Forwarding
& Filtering
folder and click on the
Multicast Forwarding
link to see the entry window below:
Figure 4- 14. Static Multicast Forwarding Settings menu
The
Static Multicast Forwarding Settings
window displays all of the entries made into the Switch’s static
multicast forwarding table. Click the
Add
button to open the
Setup Static Multicast Forwarding Table
window, as shown below.
Figure 4- 15. Setup Static Multicast Forwarding table
The following parameters can be set:
Parameter
Description
Unit
This is the Unit ID of a Switch in a Switch stack. The number 15 indicates
a GSW-1290 Switch in standalone mode.
VID
The VLAN ID of the VLAN the MAC address below belongs to.
Multicast MAC
Address
The MAC address of the static source of multicast packets. This must be
a multicast MAC address.
Port Settings
Allows the selection of ports that will be members of the static multicast
group and ports that are either forbidden from joining dynamically, or that
can join the multicast group dynamically, using GMRP. The options are
66
Summary of Contents for ProCon GSW-1290
