LevelOne ProCon GSW-1290, User Manual

Page: 74 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
as in the add new VLAN window. Notice that the VID and name cannot be changed. If you want to change
the VID or VLAN Name it will be necessary to delete the existing entry and create a new one.
Figure 4- 24. 802.1Q Static VLANs – Modify menu
GVRP Setting
Open the 802.1Q Port Settings window and select the Unit and range of ports to configure. For the
selected port or group of ports, choose to enable or disable Ingress checking and establish an acceptable
packet rule. Ingress Checking
is used to limit traffic by filtering incoming packets that have a PVID does
not match the PVID of the port. 802.1Q port settings are also used to determine whether the Switch will
share its VLAN configuration information with GARP VLAN Registration Protocol (GVRP) enabled
Switches.
The window and table below describe how to configure the 802.1Q VLAN port settings for the Switch.
74