LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
To: What Time
Enter the time of day that DST will end on, each year.
Access Profile Table
Access profiles allow you to establish criteria to determine whether or not the Switch will forward packets
based on the information contained in each packet’s header. These criteria can be specified on a basis of
VLAN, MAC address or IP address.
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a
frame the Switch will examine, such as the MAC source address or the IP destination address. The second
part is entering the criteria the Switch will use to determine what to do with the frame. The entire process is
described below in two parts.
To display the currently configured Access Profiles on the Switch, open the
Configuration
folder and click
on the
Access Profile
Table
link. This will open the
Access Profile Table
window, as shown below.
Figure 4- 39. Access Profile Table window
To add an entry to the
Access Profile Table
window, click the
Add
button. This will open the
Access
Profile Configuration
window, as shown below. There are two
Access Profile Configuration
windows
−
one for Ethernet (or MAC address-based) profile configuration and one for IP address-based profile
configuration. You can Switch between the two
Access Profile Configuration
windows by using the Type
drop-down menu, and clicking on the
Apply
button. The
Access Profile Configuration
window for
Ethernet is shown below.
89
Summary of Contents for ProCon GSW-1290
