LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
through the port. The authentication process begins when the link state of
the port transitions from down to up, or when an EAPOL-start frame is
received. The Switch then requests the identity of the client and begins
relaying authentication messages between the client and the
authentication server.
The default setting is
Auto
.
TxPeriod
Select the time to wait for a response from a supplicant (user) to send
EAP Request/Identity packets.
QuietPeriod
Select the time interval between authentication failure and the start of a
new authentication attempt.
SuppTimeout
Select the time to wait for a response from a supplicant (user) for all EAP
packets, except for the Request/Identity packets.
ServerTimeout
Select the length of time to wait for a response from a Radius server.
MaxReq
Select the maximum number of times to retry sending packets to the
supplicant.
ReAuthPeriod
Select the time interval between successive re-authentications.
ReAuth
Enable or disable reauthentication.
102
Summary of Contents for ProCon GSW-1290
