LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
PAE System Control
To set the port authenticating settings, open the
Security
folder, and then the
Port Access Entity
folder,
and then the
PAE System Control
folder. Finally click on the
802.1X Capability Settings
link.
802.1X Capability Settings
Figure 4- 50. 802.1X Capability Settings window
To set up the Switch’s 802.1X port-based authentication, select which ports are to be configured in the
From and To fields. Next, enable the ports by selecting
Authenticator
from the drop-down menu under
Capability.
Click
Apply
to make your changes take effect.
Initialize Port(s)
Existing 802.1x port settings are displayed and can be configured using the window below.
Open the
Security
folder, and then the
Port Access Entity
folder, and then the
PAE System Control
folder. Finally click on the
Initialize Port(s)
link:
103
Summary of Contents for ProCon GSW-1290
