LevelOne ProCon GSW-1290, User Manual

Page: 42 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
configuration settings have been saved to NV-RAM, they become the default settings for the Switch. These
settings will be used every time the Switch is rebooted.
Some settings, though, require you to restart the Switch before they will take effect. Restarting the Switch
erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save
all setting changes to NV-RAM before rebooting the Switch.
Factory Reset
Click the Factory Reset link in the Maintenance folder to bring up the following window.
Figure 3- 9. Factory Reset to Default Value menu
The following options are available to perform a factory reset:
Reset
−
Returns all configuration settings to the factory default settings except the Switch’s stacking mode,
IP address, subnet mask, and default gateway settings.
Reset Config
−
Returns all configuration settings to the factory default settings except the stacking mode
configuration, but does not save the settings or reboot the Switch. If you select this option the Switch
configuration will be returned to the factory default settings for the current session only. When the Switch
is rebooted, it will return to the last configuration saved to the Switch’s NV-RAM using the Save Changes
option.
•
Reset System
−
Returns all configuration settings to the factory default settings, but does not save the
settings or reboot the Switch. If you select this option the Switch configuration will be returned to the
factory default settings and then saves the factory default configuration to the Switch’s NV-RAM. The
Switch will then reboot. When the Switch has rebooted, it will have the same configuration as when it
was delivered from the factory.
Select the reset option you want to perform and click on the Apply button.
42