LevelOne ProCon GSW-1290, User Manual

Page: 109 / 144

LevelOne GSW-1290 Gigabit Layer2 SNMP Switch
SNMP User Table Display
To display the detailed entry for a given user, click on the blue User Name . This will open the SNMP User
Table Display window, as shown below.
Figure 6- 2. SNMP User Table Display window
The following parameters are displayed:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name
This name is used to specify the SNMP group created can request SNMP
messages.
SNMP Version
V1 – Indicates that SNMP version 1 will be used.
V2 – Indicates that SNMP version 2 will be used.
V3 – Indicates that SNMP version 3 will be used.
Auth-Protocol
None
−
Indicates that no authorization protocol is in use.
MD5
−
Indicates that the HMAC-MD5-96 authentication level will be used.
SHA
−
Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol
None
−
Indicates that no authorization protocol is in use.
DES
−
Indicates that DES 56-bit encryption is in use based on the CBC-
DES (DES-56) standard.
To add a new entry to the SNMP User Table Configuration , click on the Add button on the SNMP User
Table window. This will open the SNMP User Table Configuration window, as shown below.
109