Starting up the device - Configuration
Leuze electronic
BCL 604i
63
Parameter
Table 10.13:
Parameters for module 12
Parameter length
2 bytes
Input data
Table 10.14:
Input data for module 12
Input data length
1 byte
Output data
None
This module is used to set the maximum and minimum number of bar codes which are to be decoded
within a reading gate.
If parameter “Minimum number of bar codes” = 0, it is not taken into account at the decoder controller. If it
is not equal to 0, this means that the bar code reader expects a number of labels within the set range.
If the number of decoded bar codes is within the set limits, no additional “No Reads” are output.
10.7.4 Module 13 – Fragmented read result
Description
The module defines the transfer of fragmented read results. To occupy few i/o-data, the read results may
be split into several fragments with this module. The fragments can then be transmitted one after another
with a handshake.
Parameter
Table 10.15:
Parameters for module 13
Parameter length
1 byte
Parameter
Description
Addr.
Data type
Value range
Default
Unit
Minimum number
of bar codes
Minimum number of different bar codes
scanned for per reading gate.
0
UNSIGNED8
0 … 64
1
-
Maximum number
of bar codes
Maximum number of different bar codes
scanned for per reading gate. Only if this num
-
ber of bar codes has been reached, the read
-
ing gate is terminated prematurely.
a)
1
UNSIGNED8
0 … 64
1
-
a) see chapter 10.7.2, Parameters “Reading gate termination mode”
Input data
Description
Addr.
Data type
Value range
Init value Unit
Number of decod
-
ing results
Number of decoding results which have not
been fetched.
0
UNSIGNED8
0 … 255
0
-
When using this module, the ACK mode should be activated (see chapter 10.7.1 "Module 10 –
Activations", “Mode” parameter). Otherwise there is a risk of losing decoding results if the control
is not fast enough.
Parameter
Description
Addr.
Data type
Value range
Default
Unit
Fragment length
The parameter defines the maximum length of
the bar code information per fragment.
0
UNSIGNED8
1 … 28
0
-
