Functions
Leuze electronic
BCL 604i
21
4.2
autoConfig
With the autoConfig function, the device offers an extremely simple and convenient configuration option
to users who only want to read one code type (symbology) with one number of digits at a time.
After starting the autoConfig function via the display, switching input or from a superior control, it is suffi
-
cient to position a bar code label with the desired code type and number of digits in the reading field of the
device.
Afterward, bar codes with the same code type and number of digits are recognized and decoded.
For further information, see chapter 10 "Starting up the device - Configuration".
The settings made via display or webConfig configuration tool push the parameters set in the
Profibus only temporarily into the background. They are overwritten during integration into the
Profibus or when the parameter enable is deactivated!
Device settings for operating the device on the Profibus are managed and configured exclusively
by the Profibus controller (PLC). Permanent changes must be carried out here!
