Menu description
Leuze electronic
BCL 604i
35
8
Menu description
After voltage is applied to the bar code reader, a startup screen is displayed for several seconds. The
display then shows the bar code reading window with all status information.
8.1
The main menus
Use the navigation buttons
to move through the menu. Activate the desired selection with the enter
button .
8.2
Parameter menu
Parameter handling
The Parameter handling submenu is used to lock and release the parameter input via the display and for
resetting to default values.
Device information
This menu item contains detailed information on
• Device type
• Software version
• Hardware version
• Serial number
Network settings
• Display of the network settings
Bar code reading win
-
dow
• Visualization of the read bar code information
• Status overview of the switching inputs/outputs
• Bar graphs for read quality of the current bar code
Further information see chapter "Indicators in the display".
Parameter
• Configuration of the bar code reader
Further information see chapter 8.2 "Parameter menu".
Language selection
• Selection of the display language
Further information see chapter 8.3 "Language selection menu".
Service
• Scanner diagnosis and status messages
Further information see chapter 8.4 "Service menu".
Actions
• Various functions for scanner configuration and manual operation
Further information see chapter 8.5 "Actions menu".
A detailed description of the individual parameters can be found in the description of the Profibus
GSD modules (see chapter 10.5 "Overview of the project modules").
Changes made via the display are overwritten!
Device settings for operating the device on the PROFIBUS are managed and configured exclu
-
sively by the PLC. If parameters are changed via the display during bus operation, the device is
separated from the PROFIBUS at the moment parameter enabling is activated via the display.
Parameters set by the PROFIBUS are moved to the background, and changes to parameters
can be made via the display. When parameter enabling is exited, the device is automatically re
-
connected to the PROFIBUS. Upon connection to the PROFIBUS, the device receives all param
-
eters from the PLC.
