Starting up the device - Configuration
Leuze electronic
BCL 604i
76
Parameter length
37 byte
Input data
None
Output data
None
Identifier string n (n = 1 … 5)
The identifier string defines both the identifier list for the segmentation and the passthrough filter for the
subsequent filtering.
The string may contain wildcards. That is, an arbitrary number of '?' are permitted as placeholders for an
arbitrary character at exactly that position.
Also permitted are '*' as placeholders for a character sequence of arbitrary length, and an 'x' if the char
-
acter at the respective position is to be deleted. There are a total of 5 identifier strings.
An identifier with less than 5 characters must be null terminated. However, if the identifier string consists
of exactly 5 characters, it does not have to be null terminated.
10.10.3Module 54 – Segmentation according to identifier and separator
Description
This module activates the segmentation according to identifier and separator. The parameters specify the
identifiers to be searched for, the output mode, and the parameters for the identifier/separator algorithm.
Parameter
Table 10.36:
Parameters for module 54
Start position of
the 4th identifier
Specifies the position of the first character of
the fourth identifier in the data string of the bar
code.
The first character in the bar code has position
1. If the parameter is = 0, it is deactivated.
33
UNSIGNED8
0 … 127
0
-
Start position of
the 4th data value
Specifies the position of the first character of
the fourth data value in the data string of the
bar code.
The first character in the bar code has position
1. If the parameter is = 0, it is deactivated.
34
UNSIGNED8
0 … 127
0
-
Start position of
the 5th identifier
Specifies the position of the first character of
the fifth identifier in the data string of the bar
code.
The first character in the bar code has position
1. If the parameter is = 0, it is deactivated.
35
UNSIGNED8
0 … 127
0
-
Start position of
the 5th data value
Specifies the position of the first character of
the fifth data value in the data string of the bar
code.
The first character in the bar code has position
1. If the parameter is = 0, it is deactivated.
36
UNSIGNED8
0 … 127
0
-
Parameter
Description
Addr.
Data type
Value range
Default
Unit
Parameter
Description
Addr.
Data type
Value range
Default
Unit
Identifier list
Identifier 1
The identifier string is used for the identifier list
and the filtering according to the segmentation.
0
STRING
5 characters
null termi
-
nated
1 … 5 bytes of ASCII
characters
‘*‘
-
Identifier 2
See identifier 1.
5
STRING
5 characters
null termi
-
nated
1 … 5 bytes of ASCII
characters
\0
-
Identifier 3
See identifier 1.
10
STRING
5 characters
null termi
-
nated
1 … 5 bytes of ASCII
characters
\0
-
