63
Leica ST5020
Defining the program steps
(continued)
Fig. 58
↓
Fig. 59
Fig. 60
5. Operation
• Click on
STATION
in the header row, the
CHOOSE STATION
menu opens up (
Fig. 58
).
• To allocate a station to the step, press the
corresponding station button. The station
(button) is displayed as pressed, and the
lower row shows "
P 1
".
• Pressing
CONFIRM
assigns the selected sta-
tion to the step, and the display
switches to the
PROGRAMMING
menu (
Fig. 60
).
• Pressing
RMS
gives you access to the RMS
protocol (
Fig. 59
) – a table providing informa-
tion on the current configuration (which rea-
gent in which station).
See also
chapter 5.4.7
RMS.
Important!
Each station may only be selected
once in a program. Otherwise, the RE-
AGENT column is highlighted in red,
and the program cannot be started.
• If a reagent has already been assigned to
the selected station (recommended), it will
be displayed in the
REAGENT
column.
In this case, the row for the step is highlight-
ed in blue.
Selecting a station for a step
