22
Instructions for Use, V2.0, RevG - 07/2016
4.4 Installing the oven (optional)
The following parts must be in-
cluded:
15 - Oven module
16 - Paraffin collecting tray
17 - Cover
18 - Screws
19 - Washers
20 - Screwdriver
21 - Allen key, size 2.5
22 - Allen key, size 4.0
Insert paraffin collecting tray
into corresponding opening in
oven module (possible only in
one direction, as shown here).
• Take the oven kit out of the box and verify
whether it is complete.
15
16
17
18
19
22
21
20
Fig. 10
• Check the voltage selector setting and ad
-
just if necessary.
Important!
The voltage selector switch must be
set to the same mains voltage as the
instrument.
To adjust the voltage selector setting, insert
screw driver (
20
) into gap (
23
) and turn care-
fully until the white point above the correct
voltage indication is located underneath the
white triangle.
115 means: Instrument voltage 100 -120 V.
230 means: Instrument voltage 230 - 240 V.
Fig. 11
Rear panel - oven
Voltage setting
100 - 120 V
Voltage setting
230 - 240 V
24
25
23
4. Setting up the instrument
