Operating Manual Leica EM ACE600
Version 01/19
Page 90
With the help of the holding pin (1) which is screwed into the clamps, the carbon
rod can be easily loaded in the evaporation source. Make sure the clamp (2) sits
straight in the recess and firmly tighten the screw. It is recommended to start with
the flat rod on the front side in respect to the instrument.
When the second rod is mounted in the same way the tool, which keeps the
evaporation source, open is removed (1). The two rods should push against each
other (2).
1
2
1
2
