LEGRAND D45 SYSTEM, Installation Manual, Page: 253 / 254

249
346858
CF1 CF2 CF3 CF4 CF5 CF6 CF7
F I #I MC
Configuration
D45 to 2 WIRE interface
Two different configuration modes available for device :
- Simple configuration
(MODE 1)
- Flexible configuration (MODE 2)
Configuration examples:
FF II = number of the indoor unit (FF refers to the first two places of the IP number and
II refers to the last two places, namely the room number at the floor).
Example 1
If the unit building relevant to 346858 has 18 floors, 4 households at each floor,
then D45 system can adopt MODE 1 for the system configuration. When the
346858 floor is 17/F and the second household, then its configuration can be
made like follows :
Example 2
If the unit building relevant to 346858 has 28 floors, 3 households at each floor,
then D45 system can adopt MODE 2 for the system configuration. When the 346858
floor is 10/F and the first household, then its configuration can be made like
follows :
CONFIGURATION
PLACE
SIMPLE CONFIGURATION
MODE 1
CF1
FF=17
CF2
CF3
II=02
CF4
CF5
Default 04, no need to set
CF6
CF7
No need to set, relying on the setting of the Riser shunt
CONFIGURATION
PLACE
SIMPLE CONFIGURATION
MODE 1
FLEXIBLE CONFIGURATION
MODE 2
CF1
FF= the floor number relevant
to the HANDSET (01≤FF≤20) FF= the floor number relevant to the
IP (01≤FF≤99)
CF2
CF3
II=the room number relevant
to the IP floor (01≤II≤04) II=the room number relevant to the IP
floor (01≤II≤#II)
CF4
CF5
#II (Mode 1, default 04, no
need to set) #II=household number of the unit
(01≤#II≤99)
CF6
CF7
MC (no need to set, relying on
the setting of the Riser shunt) MC (no need to set, relying on the
setting of the Riser shunt)
CONFIGURATION
PLACE
FLEXIBLE CONFIGURATION
MODE 2
CF1
FF=10
CF2
CF3
II=01
CF4
CF5
#II=03
CF6
CF7
No need to set, relying on the setting of the Riser shunt
BT00454-b-en 13/05/2013